st30 loader
tezst30
Join Date: Aug 2005 Posts: 4 s yorkshire |
2005-08-19 115107
can someone help i have just bought a kubota st30 with an la350st loader on it i kneed to know how to take loader of there are two pieces of l shaped metal brackets about a meter long that are clipped on to the side of the loader but i cant figure out where they would fit to aid taking the loader off.( come on put me out of my misery and tell me how to do it)thanks for any help
Reply to | Quote Reply | Add Photo
st30 loader
oneace
Join Date: Mar 2004 Posts: 1490 south central pa Pics |
2005-08-19 115110
You are in Europe? ....
Reply to | Quote Reply | Add Photo
st30 loader
tezst30
Join Date: Aug 2005 Posts: 4 s yorkshire |
2005-08-20 115157
yes i am in the uk yorkshire, is there only me with an st30 as there does not seem to be many about. hope you can help me with the loader problem thanks (terry ) ....
Reply to | Quote Reply | Add Photo
st30 loader
oneace
Join Date: Mar 2004 Posts: 1490 south central pa Pics |
2005-08-20 115159
From the pictures that I have seen It looks like the loader is is all one piece? Are there two pins holding it on at the front corners by the grill of the tractor? ....
Reply to | Quote Reply | Add Photo
st30 loader
tezst30
Join Date: Aug 2005 Posts: 4 s yorkshire |
2005-08-20 115162
thanks for your reply oneace there are two pins i think that hold it place, i can work out how to take the loader off but i wondered how it is supported once removed.
(back to the two long brackets that are clipped to the loader approx 1m long by 1" squrare. three inch from the bottom they are bent over at 45 degrees) i and numorous other people can,t work out what they are for we can,t see anywhere they would fit. i could send a photo if it possible ....
Reply to | Quote Reply | Add Photo
st30 loader
oneace
Join Date: Mar 2004 Posts: 1490 south central pa Pics |
2005-08-20 115174
A photo would help. and any photos of the tractor loader. ....
Reply to | Quote Reply | Add Photo
st30 loader
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2005-08-21 115183
I believe they go in the bottom of the masts that support the loader to the base frame that stays with the tractor. When you undo the two pins on the bottom of the loader and raise it they should become visable if they are not when attached. The US model numbers are not the same as in other countries. ....
Reply to | Quote Reply | Add Photo
st30 loader
tezst30
Join Date: Aug 2005 Posts: 4 s yorkshire |
2005-08-21 115189
thanks again for the info when i get time i will loosen the loader of and see if the brackets will fit under the masts i have taken some photos of it today but as i am a brand new member and not a premium one i can,t post them on the web site but i will try what you said cheers (terry) ....
Reply to | Quote Reply | Add Photo
st30 loader
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2005-08-21 115215
They don't go underneath but the go into two small square wholes that are made for them. Are there also two pieces of band stock about 1/4" thick and about 1 1/2" wide with little feet on the ground end and they are to control the bucket roll back and also to support the loader and slide into the sides of the bucket. ....
Reply to | Quote Reply | Add Photo
st30 loader
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2005-08-21 115216
They don't go underneath but the go into two small square wholes that are made for them. Are there also two pieces of band stock about 1/4" thick and about 1 1/2" wide with little feet on the ground end and they are to control the bucket roll back and also to support the loader and slide into the sides of the bucket. ....
Reply to | Quote Reply | Add Photo
st30 loader
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2005-08-21 115217
They don't go underneath but the go into two small square wholes that are made for them. Are there also two pieces of band stock about 1/4" thick and about 1 1/2" wide with little feet on the ground end and they are to control the bucket roll back and also to support the loader and slide into the sides of the bucket. ....
Reply to | Quote Reply | Add Photo
st30 loader
oneace
Join Date: Mar 2004 Posts: 1490 south central pa Pics |
2005-08-22 115256
Art your record is skipping....
is skipping....
is skipping... ....
Reply to | Quote Reply | Add Photo
st30 loader
Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York Pics |
2005-08-22 115266
I didn't notice! Normally everything goes quite fast! ....
Reply to | Quote Reply | Add Photo
st30 loader
ecoalgarve
Join Date: Dec 2009 Posts: 2 U.K. & Portugal |
2009-12-22 167646
I know its a long time ago but I was wondering if you still had your ST30? If so, could I ask you a couple of things about the LA350 loader. I am trying to find a suitable loader for my ST30.
Tnx Simon ....
Reply to | Quote Reply | Add Photo
Go Top
Share This